Is your Ac Fan Motor not spinning ? If so, there could be a couple of reasons for that. One reason could be that the capacitor that controls the rotation is not operating correctly. If the capacitor fails, then you’ll find that the rotation will stop as well. In order to resolve this problem, all you need to do is open up the case and check to see if the capacitor is bad.
If your AC fan motor not spinning, then there could be a problem with your air conditioning unit itself. The wires might be burnt or disconnected. These are two common issues and they can both be fixed quite easily. If your AC unit is still under warranty, you should have no trouble with either of these issues. However, if it’s a brand new unit, you may want to consider replacing it.
It may take a few days before it starts spinning properly
When you first put the new unit fan on, it may take a few days before it starts spinning properly. The first thing you can do to help the process along is to verify that all the blades on the unit are in good working order. You can do this by turning on the fan and checking to see how many times it spins. If more blades are spinning than when you turned it on, you may want to have the unit fan checked out by a professional. On the other hand, if you only have a few blades that are not spinning, you can still verify that they are all in good operating order days away.
If your AC unit does not seem to be rotating properly and it keeps turning off and on, there may be a couple of reasons why this is occurring. The most likely reason for this is that the fan motor itself is not turning correctly. There are several things that you can do to correct this problem. Firstly, make sure that the switch on the wall is in good working order. If it does not light up, you should check to make sure that the batteries in the unit are not losing power. If both of these problems are resolved, then your AC fan motor is probably the cause of your problem.
The next thing that could be causing your outdoor unit not to spin is your air compressor
If your compressor is drawing too much air that is not needed, then this will slow down the rotation of the blades on the outside unit. The compressor may need to be cleaned or you may even need to replace some of the parts. If you clean the outside unit, you will likely not be able to use the compressor properly so you should consider having it replaced.
Finally, if your AC unit is drawing too much air that is hot, then it is possible that the blower motor on your air conditioner fan is not rotating as it should. If this is the case, then your hvac unit needs to be cleaned or replaced. If the condenser fan is not functioning properly, then you should replace the entire condenser fan . Replacement of these parts should improve the spinning of your outside unit.